DYWIDAG Threadbar
The original, high quality DYWIDAG Threadbar may not be welded due to its chemical composition and must be protected against all kinds of weld spatter. The Type FA DYWIDAG Threadbar is insensitive to weld spatter, but only features limited weldability.
DYWIDAG Threadbar, not weldable
Article No. | Ø [mm] | Steel Grade | Max. Load [kN] | Working Load [kN] | Weight [kg/m] |
---|---|---|---|---|---|
15 F 0105 | 15/17 | St 900/1100 | 195 | 90 | 1.44 |
26 WR 0105 | 26.5/30 | St 950/1050 | 580 | 300 | 4.50 |
Hot rolled, subject to independent supervision according to German bar approval.
Not weldable: Do not heat or weld the Threadbars, they may break.
All Threadbars also available galvanized > Article No. …/V
(example 15 F 0105/V)
DYWIDAG Threadbar, insensitive to weld spatter
Article No. | Ø [mm] | Steel Grade | Max. Load [kN] | Working Load [kN] | Weight kg/m] |
---|---|---|---|---|---|
15 FA 0105 | 15/17 | St 900/1100 | 190 | 90 | 1.44 |
20 FA 0105 | 20/23 | St 900/1100 | 345 | 160 | 2.56 |
Welding is not recommended, but Threadbars are insensitive to weld spatter.
All Threadbars also available galvanized > Article No. …/V
(example 15 FA 0105/V)
MUKUSOL Threadbar
The MUKUSOL Threadbar‘s continuous thread is cold-rolled onto the steel and not cut. The thread is identical to DYWIDAG Thread in terms of dimensions and tolerances and can be combined with all accessories. MUKUSOL Threadbars can be welded without any problems in common conditions.
MUKUSOL Threadbar, weldable
Article No. | Ø [mm] | Max. Load [kN] | Working Load [kN] | Weight kg/m] |
---|---|---|---|---|
12 FS 0000 | 12/14 | 60 | 30 | 1.00 |
15 FS 0000 | 15/17 | 165 | 80 | 1.50 |
15 VA 0000* | 15/17 | 140 | 70 | 1.50 |
20 FS 0000 | 20/23 | 275 | 140 | 2.60 |
26 ES 0000 | 26.5/30 | 500 | 240 | 4.56 |